1366 - Bonnet Carbon fits Toyota GT86

These are not original BMW products. The name is only used to identify the vehicle model.

.

Article features:

• Real carbon on the visible surface of the item .
• Internal GRP to reinforce the component .
• UV-resistant clear lacquer
• Includes material certificate

Technical details/ suitable for:
Toyota GT86

Tips for fitting:

• We recommend that any installation be carried out by a specialist workshop in advance.
• To dismantle your old bonnet, you like to take reinforcements, as these can fall from the inside (on the bonnet bracket the screws) during dismantling.
• After loosening the screws on the bracket, you must disconnect all cables etc. that are from the bonnet (depending on the equipment/model, the wiper water nozzles may be attached to the bonnet)
• .
• When you have removed the bonnet, remove the latch and hooks etc. from the old bonnet and fit them to the new bonnet.
• Now replace the bonnet with your CW item and screw it to the original brackets using the screws already removed.
• .
• !CAUTION! - make sure that the bonnet fits exactly as you removed the old one, so that the bonnet does not fit unevenly and may not be able to close.
• When you have tightened everything properly, carefully lower the bonnet and look first to see if it is touching the vehicle on any sides.

• For any queries you may have, please do not hesitate to contact our team .